ANDROTEC MTR-125RF

With RF communication port for reading out on a PC and MoniMetor for in combination with a rotating laser

For each MTR-125RF receiver that communicates with the MoniMetor an altitude alarm can be set up separately and will be shown both acoustically and optically on the MoniMetor.

All data can be stored directly on a PC or later.

Up to 8 MTR-125 RFs can be connected to the MoniMetor via RF for e.g.

deformation measurements
Excavation work in cities to accurately detect subsidence
Construction of tunnels and bridges
Monitoring of constructions
Measurement of low frequency vibrations
alignment monitoring etc.

Manual receiver for rotation lasers with very large receiving field for accurate reading of +50 mm to -50 mm above/below the set zero point.

Standard Specification MTR-125(RF) 

Memory up to 100 measurements, readable with optional Usb cable +software (+€99,-)
Digital millimeter display always indicates the missing difference with the set height.
AutoSound: acoustic signal in different frequencies.
Hold function for holding the measured value
Special menu functions: for user-specific programming.
incl. anti-reflex window
variable height adjustment within a range of +/-30 mm
Extremely robust staff clamp for fixing to round and angular measuring rods.
Automatic calibration function for improved detection accuracy.
Height difference measurement +5 cm to -5 cm without moving the staff clamp (sliding zero point)
Rubber overmoulding
Readable LC-display on front and back
Readability also via 3 LEDs in different colours
Horizontal vial
Accuracy adjustable from 0.1-0.5-1-2-5 to 10 mm
100% waterproof
Working range 600 metres from the laser
Rotation speed of the laser from minimum 105 RPM to maximum 1200 RPM
Reception angle of the laser beam 45
Including: Beam clamp